Two post parking lift 2HP200

Name: Two post parking lift 2HP200
SKU: 700.015.002
Price: 3270 EUR
Availability: InStock

3 270€ Excluding tax

Delivery time: 45-60 working days

Available on demand

Article: 700.015.002

Technical specifications:

Capacity, kg:

2700

Platform lenght, mm:

4080

Platform width, mm:

2100

Lifting stroke up to, mm:

2100

Minimum height, mm:

200

Technical specifications:

Capacity, kg	2700
Platform lenght, mm	4080
Platform width, mm	2100
Lifting stroke up to, mm	2100
Minimum height, mm	200

Description

Parking lift 2HP200 two post parking lift, the platform of which moves only vertically, so the users have to clear the ground level to get the higher level car down. 2HP200 is a kind of dependent parking equipment, suitable for both commercial and residential parking purposes. In case of short time user (e.g. for office, hotel, commercial building) only possible on lower platform, or with attendant or valet parking both levels are possible for short time user.

Technical specifications

Capacity, kg	2700
Platform lenght, mm	4080
Platform width, mm	2100
Lifting stroke up to, mm	2100
Minimum height, mm	200
Drive mode	Hydraulic cylinder + chains
Operation	Key switch
Lifting speed	<50s
Descending speed	<35s
Power supply	380V, 1/3P, 50/60Hz

Dimensions

Heavy duty, quality arm roller bearings. Crown head, yoke type, track roller bearings with a twin ball and cage, lithium greased and sealed for life. Chromed for heavy duty or stainless steel axle and cylinder pins as options.
Integral (within base frame) or remote power packs. IP54 as standard. 3 phase, single phase or low voltage DC and manual pumps available. Hold to run emergency lowering.

A — 3360mm; B — 3320mm; C — 2100mm; D — 2390mm; E — 2550mm; F — 1730mm; G — 4080mm; H — 4215mm; I — 1805mm; J — 2100mm;

Standard accessories

Accommodate most types of vehicles;
Galvanized and corrugated platform guarantee safety and long lifetime;
Anti-slip corrugated deck protect both vehicle and driver from possible slip and damage but still high-heel shoe friendly;
Single hydraulic lifting cylinders with chains as a driven system;
The pole with the piston is chroming to anti-corrode to ensure its long using life;
Individual hydraulic power pack and control panel for each unit. As an option, One commercial power pump shared by multiple units can extremely shorten the lifting time;
Self-standing and self-support structure;
Symmetrically designed column;
Synchronization chain assuring the lifting platform balance;
Middle post sharing feature save cost and space;
Electric key switch for security and safety – Automatic shut-off if the operator releases the key switch;
Dynamic mechanical locks as an anti-falling device hold the platform in place;
Manual lock release available in case electricity failure;
The platform can be stopped at different heights to fit for various vehicles and ceiling heights

A — Limit switch in the top of the post. When the platform goes to the appointed height, it will automatic stopped to avoid the wrong operation ; B — Pressure relief valve and pressure compensate flow control valve ; C — Auto locking system in case electrical failure ; D — Mechanical anti-falling safety lock every 100mm on the post (yes) ; E — Photocell sensor available to check under car and avoid trespass (yes) ; F — Synchronization chain (yes) ; G — Overload protection device for hydraulic power pack (yes) ; H — Electric protection for power over load or under voltage (yes) ; ; ;