Self-propelled scissor lifts SXW200

11 980 Excluding tax

Delivery time: 45 days
Article: 700.010.002
Technical specifications:
Capacity, kg:

300

Platform lenght, mm:

2240

Platform width, mm:

810

Lifting stroke up to, mm:

6000

Minimum height, mm:

2280

Technical specifications:
Capacity, kg

300

Platform lenght, mm

2240

Platform width, mm

810

Lifting stroke up to, mm

6000

Minimum height, mm

2280

Description

Self-propelled Electric Scissor lifts are mostly used on flat indoor or outdoor surfaces. The body is pleasing to the eye and flexible to operate. The main engine can travel and turn automatically. It features imported hydraulic components, explosion-proof pipe unit, and emergency descent switch; motorized ascent, descent and travel function; low-noise and zero-air pollution; durable, chip-free, skid-proof and traceless tires which don’t scratch the ground; optimized product control mode and procedure focusing on safety, creating a much more humanized operation.

Technical specifications

Capacity, kg

300

Platform width, mm

810

Lifting stroke up to, mm

6000

Minimum height, mm

2280

Lift function

hydro-electric

Minimum ground clearance

100 mm

Outside turning radius

2100 mm

Motor power (lifting)

24V / 3,3kW

lifting / lowering time

35/25 seconds, the ascent / descent is regulated

Drive horizontal movemen

electric, battery volume 4 x 250Ah, complete with charger

Maximum travel speed

3 km/h

Maximum slope

25%

The maximum slope of work surface

up to 3 °

Wheel size

Ø380mm, width 130mm

Steering

from the platform

Drive & steer model

2WD * front-wheel

Delivery

fully assembled

RAL colour

RAL 5017

Net weight

1950kg

Dimensions

A 8900mm; B 8000mm; C 1870mm; D 2400mm; E 810mm; F 3080mm; G 760mm; I 900mm; H 900mm; J 3300mm;

Standard accessories

All Gidrolast SXW-series scissor lifts adopt high-performance battery power, pollution-free and no emissions, low noise electric pump, can also be used even in the area of high environmental requirements, such as office buildings, hotel, hospital, school and so on.

Fully proportional joystick control, either lifting or moving, all can easily operate in the joystick. Zero inside turning radius allowing users to use in a narrow space, and also facilitate changing positions. Gidrolast SXW-series has two kinds of moving speed to secure move quickly and lift safely. All the Gidrolast SXW-series scissor lifts have extended platforms which makes the operator get close to the work points much easier and breakthrough the space obstacles.

Gidrolast SXW gives full consideration to the convenience of the users in their daily work maintenance. All the Gidrolast Electric Self-propelled Scissor Lifts have a fault diagnosis system, this makes the user can find the point of failure in one time. Door-open control box and battery box allow maintenance personnel to find the maintenance point quickly and easily. Also, it is easier to change the spare parts. The scissor booms repair bracket, so that the user does does not need the help of lifting equipment, boom system can be easily overhauled.

A — Standard detachable platform (2.2kW) ; B — Extended platform (yes) ; C — Proportional controls for lift and drive functions (yes) ; D — Automatic 25Amp battery charger provides strong power for vehicle (yes) ; E — Safe distance protection when the platform lowering down (yes) ; F — Manual emergency platform lowing valve. When there is no power the machine can lower down safely (yes) ; G — Safety valves (preventing the table from falling in case of pressure loss in the hydraulic system) (yes) ; ; I — Multiple disc brakes provide smooth deceleration ; ; K — Pothole guards protect the machine from tilting down when the machine moving on the raised position ; L — Non-marking tires make sure there is no damage and no marks on the ground ; M — AC wiring to platform ; N — Tilt level sensor with audible alarm ; O — Beeper horn ; P — Hour meter ; Q — Safety brackets ; R — Battery charge indicator ; S — Forklift sockets ; T — Diagnosis system ; U — Fault code display ;

Delivery conditions

  • Package: standard for truck transport by land;
  • Warranty: 12 months;
  • Delivery conditions: EWX Peschiera Borromeo – (MI), Italia
  • Manufacturer: GIDROLAST, ITALY.

Why choose our company?

Branded hydraulic Gidrolast, Italy
Material critical structures from 13Mn6, SB49, А-516
Operating temperature from -30°С...to +80°С
Average service life - up to 5 years
Products are certified according to requirements EAC and EC
Use of standard components and parts
More than 50 repair center in Europe
Warranty 30 000 cycles

Reviews

There are no reviews yet.

Be the first to review “Self-propelled scissor lifts SXW200”

Your email address will not be published. Required fields are marked *