Paint finishing lift Gidrolast LP2610

Delivery time: 45-60 working days

Available on demand

Article: 700.041.001

Technical specifications:

Capacity, kg:

500

Platform capacity:

227 kg

Platform lenght, mm:

500

Platform width, mm:

800

Lifting stroke up to, mm:

5000

Technical specifications:

Capacity, kg	500
Platform capacity	227 kg
Platform lenght, mm	500
Platform width, mm	800
Lifting stroke up to, mm	5000

Description

Gidrolast paint finishing lift 3D hydraulic personnel lifts are capable of 3-axis travel. The lift travels on a guide rail system with the lower rail anchored to the floor and the upper rail mounted to the wall of the booth. The X-axis travel (left and right movement of the lift) allows the lift to travel back and forth along the length of the booth on a rail system. The Z-axis travel (up and down movement of the platform) makes it possible to elevate the operator platform from the lowest position of 635mm (25″) above the top of the lower rail to a maximum raised height of up to 560mm (22″) allowing for operator working height of up to 710mm (28″) (depending on lift model). The Y-axis travel (in and out motion of the operator platform) makes it possible to move the operator platform from a retracted position of 80mm (3″) (as measured from the booth wall to the front of the operator platform) to a fully extended position of 230-180mm (9″-7″) (from the booth wall to the front of the operator platform.) an extended reach feature is available, allowing the platform to extend out 360mm (14″) from the booth wall to the front of the operator platform. The three axes of travel can be operated either independently or at the same time.

The lift is controlled by the operator from a control console located in the front of the platform, which allows the worker to face forwards and observe the area as they move the lift. Along with the motion controls for the lift, the console includes an emergency stop button, emergency descent actuation button and an unoiled air supply connection for tools or equipment.

Properly maintained, Paint finishing lift 3D personnel lifts and work platforms will provide many years of trouble-free operation, increasing both the safety and performance of your workers.

3D paint finishing lifts are designed to enhance the productivity and ergonomics of operators. The hydraulically powered lifts are the perfect accessory in hazardous environments such as paint booths or wet locations like wash booths, but can be used in many other manufacturing process areas such as welding, assembly or loading bays.

Technical specifications

Capacity, kg	500
Platform capacity	227 kg
Platform lenght, mm	500
Platform width, mm	800
Lifting stroke up to, mm	5000
Minimum height, mm	200
Lift cycles max.	10 per hour
Lift function	electro-hydraulic
Power	1,1 kWh
Delivery	fully assembled
Frequency	50 Hz
Voltage	380 V
RAL colour	RAL 5017
Max. length of the painting booth	20 m
Travel speeds	X-Axis variable up to 12 mpm, Y-Axis 4.5 mpm, Z-Axis 4.5 mpm.

Dimensions

Lifts can be designed to fit your specific application.

A — ; B — 3500 mm; C — ; D — 3700 mm; E — ; F — 800 mm; G — 500 mm; H — ;

Standard accessories

A — Remote hydroelectric station ; B — Remote control panel ; C — Lenticular corrugated coating (yes) ; D — Chokes for adjusting the lifting and lowering speed of the lifting table (yes) ; E — Safety valves (preventing the table from falling in case of pressure loss in the hydraulic system) (yes) ; F — Guide beams (yes) ; G — Press – oilers (greases) for service maintenance of all mobile units of the lifting mechanism (yes) ; H — Overload protection (yes) ;