Mid rise ”service” scissor lift JA3000S-E

1 632 Excluding tax

Delivery time: 45-60 working days
Article: 700.020.001
Technical specifications:
Capacity, kg:


Platform lenght, mm:


Platform width, mm:


Lifting stroke up to, mm:


Minimum height, mm:


Technical specifications:
Capacity, kg


Platform lenght, mm


Platform width, mm


Lifting stroke up to, mm


Minimum height, mm



JA3000S-E is a low profile mid rise scissorlift suitable for special vehicles, car polishing or smaller repair. The scissorlift has self-lubricated bearings maintenance free. Simple modern design and made by only the best possible components all manufactured in Europe!. JA3000S-E has CE approval certificate and are produced in Europe.


JA3000S-E has smooth platforms with access ramps which can be used at extentions of the platforms.

European production

JA3000S-E Are produced in Europe and are produced of the best possible components, to ensure the best possible product for the end-user.

Safety lock

The JA3000S-E is without mecanical safety lock system, which means, when the lift is raised the hydraulic cylinders hold the pressure and act like a safety lock system in various heights.

The lift is simply top quality and has many fans in particular car preparation, auto paint shops and everything from the discerning individual to the large authorized workshop. The Jema Autolifte JA3000S-E is CE approved!

Technical specifications

Capacity, kg


Lifting stroke up to, mm


Minimum height, mm


Lifting time

40 seconds

Electrical requirement

380V power supply

Total weight

480 kg


Jema Autolifte A/S, Denmark

Drop time

30 seconds

Motor power

2.2 Kw

Noise level

60 db


Heavy duty, quality arm roller bearings. Crown head, yoke type, track roller bearings with a twin ball and cage, lithium greased and sealed for life. Chromed for heavy duty or stainless steel axle and cylinder pins as options.
Integral (within base frame) or remote power packs. IP54 as standard. 3 phase, single phase or low voltage DC and manual pumps available. Hold to run emergency lowering.


A 1850 mm; B 1450 mm; C 290 mm; D 100-960 mm; E 790 mm; F 530 mm;

Standard accessories

The construction, hydraulic and electrical systems conform to the requirements of European standards. Typically these include safety gaps and clearances between fixed and moving parts, moving and moving parts, hose break rupture valves, mechanically actuated safety trip device, manually operated blocking devices, overload detection and protection. Most of Gidrolast scissor lift tables are supplied with an individual Load Test Certificate as well as the applicable Certificate of Conformity or Certificate of Incorporation.


A — Control box, remote hydroelectric station ; B — Lenticular corrugated coating ; C — Limit switches for limiting the lifting height and shutting (yes) ; D — Reinforced lifting platform (yes) ; E — Press – oilers (greases) for service maintenance of all mobile units of the lifting mechanism (yes) ; F — Chokes for adjusting the lifting and lowering speed of the lifting table (yes) ; G — Safety valves (preventing the table from falling in case of pressure loss in the hydraulic system) (yes) ; H — Overload protection (yes) ;

Delivery conditions

  • Package: standard for truck transport by land;
  • Warranty: 12 months;
  • Delivery conditions: EWX Peschiera Borromeo – (MI), Italia
  • Manufacturer: GIDROLAST, ITALY.

Why choose our company?

Branded hydraulic Gidrolast, Italy
Material critical structures from 13Mn6, SB49, А-516
Operating temperature from -30°С...to +80°С
Average service life - up to 5 years
Products are certified according to requirements EAC and EC
Use of standard components and parts
More than 50 repair center in Europe
Warranty 30 000 cycles


There are no reviews yet.

Be the first to review “Mid rise ”service” scissor lift JA3000S-E”

Your email address will not be published. Required fields are marked *