U-shape low profile lift Gidrolast UX0511

Name: U-shape low profile lift Gidrolast UX0511
SKU: 700.002.001
Price: 6234 EUR
Availability: InStock

6 234€ Excluding tax

Delivery time: 45-60 working days

Available on demand

Article: 700.002.001

Technical specifications:

Capacity, kg:

500

Platform lenght, mm:

1500

Platform width, mm:

1150

Lifting stroke up to, mm:

1100

Minimum height, mm:

100

Technical specifications:

Capacity, kg	500
Platform lenght, mm	1500
Platform width, mm	1150
Lifting stroke up to, mm	1100
Minimum height, mm	100

Description

An interesting configuration of this lift allows you to lift pallets with cargo directly from the floor when you bring it on a trolley. This kind of lift is used without additional ramps and is very easy to use. Lifts are delivered with a separate, alternatively located hydraulic unit. Our U-lifts are fully equipped for operation, without the additional costs associated with the manufacture of the pit and other infrastructure required for stationary hydraulic lifts of similar lifting capacity.

Lifting platforms are designed to carry dynamic and off-center loads within the BS EN 1570 description of half of the load on half of the platform length, 1/3 of the load on half of the platform width. Platforms made with a square not radius edges for greater strength, better load support and machinery mounting. Platforms can be smooth or slip resisting tear pattern plate.

Heavy duty, quality arm roller bearings. Crown head, yoke type, track roller bearings with a twin ball and cage, lithium greased and sealed for life. Chromed for heavy duty or stainless steel axle and cylinder pins as options.

Integral (within the base frame) or remote power packs. IP54 as standard. 3 phase, single phase or low voltage DC and manual pumps available. Hold to run emergency lowering.

Technical specifications

Capacity, kg	500
Platform lenght, mm	1500
Platform width, mm	1150
Lifting stroke up to, mm	1100
Minimum height, mm	100
Scissors type	single scissors
Lift speed with/without load	42 mm/s
Lowering speed with/without load	35 mm/s
Lift cycles max.	10 per hour
Lift function	electro-hydraulic
Power	1,1 kWh
Delivery	fully assembled
Frequency	50 Hz
Voltage	380 V
RAL colour	RAL 5017
Net weight	220 kg

Dimensions

The construction, hydraulic and electrical systems conform to the requirements of European standards. Typically these include safety gaps and clearances between fixed and moving parts, moving and moving parts, hose break rupture valves, mechanically actuated safety trip device, manually operated blocking devices, overload detection, and protection. Most of Gidrolast scissor lift tables are supplied with an individual Load Test Certificate as well as the applicable Certificate of Conformity or Certificate of Incorporation.

A — 1200mm; B — 100mm; C — 1500mm; D — 1100mm; E — 1150mm; F — 550mm; G — 300mm;

Standard accessories

A — Remote hydro-electric station (2.2kW) ; B — Remote control panel (1pc) ; C — Lenticular corrugated coating (yes) ; D — Limit switches for limiting the lifting height and shutting (yes) ; E — Reinforced lifting platform (yes) ; F — Protection against tilting of the scissor lift (yes) ; G — Press – oilers (greases) for service maintenance of all mobile units of the lifting mechanism (yes) ; H — Chokes for adjusting the lifting and lowering speed of the lifting table (yes) ; I — Safety valves (preventing the table from falling in case of pressure loss in the hydraulic system) (yes) ; J — Overload protection (yes) ;