Low profile lifting table Gidrolast LX11

Sale!

4 115 3 295 Excluding tax

Delivery time: 45 days
Article: 700.001.011
Technical specifications:
Capacity, kg:

1000

Platform lenght, mm:

1200

Platform width, mm:

800

Lifting stroke up to, mm:

850

Minimum height, mm:

100

Technical specifications:
Capacity, kg

1000

Platform lenght, mm

1200

Platform width, mm

800

Lifting stroke up to, mm

850

Minimum height, mm

100

Description

The low profile lifting table is convenient because it has a low height of the pick-up when folded, so there is no need to make a pit for it. This kind of lift is mainly used for cargo that was brought on a hydraulic trolley on the ramp.

Technical specifications

Capacity, kg

1000

Platform width, mm

800

Lifting stroke up to, mm

850

Minimum height, mm

100

Scissors type

single scissors

Lift speed with/without load

42 mm/s

Lowering speed with/without load

35 mm/s

Lift cycles max.

10 per hour

Lift function

electro-hydraulic

Power

1,1 kWh

Delivery

fully assembled

Frequency

50 Hz

Voltage

380 V

RAL colour

RAL 5017

Dimensions

Lifting platforms are designed to carry dynamic and off-center loads within the BS EN 1570 description of half of the load on half of the platform length, 1/3 of the load on half of the platform width. Platforms made with a square not radius edges for greater strength, better load support and machinery mounting. Platforms can be smooth or slip resisting tear pattern plate.
Heavy duty, quality arm roller bearings. Crown head, yoke type, track roller bearings with a twin ball and cage, lithium greased and sealed for life. Chromed for heavy duty or stainless steel axle and cylinder pins as options.
Integral (within the base frame) or remote power packs. IP54 as standard. 3 phase, single phase or low voltage DC and manual pumps available. Hold to run emergency lowering.

The construction, hydraulic and electrical systems conform to the requirements of European standards. Typically these include safety gaps and clearances between fixed and moving parts, moving and moving parts, hose break rupture valves, mechanically actuated safety trip device, manually operated blocking devices, overload detection, and protection. Most of Gidrolast scissor lift tables are supplied with an individual Load Test Certificate as well as the applicable Certificate of Conformity or Certificate of Incorporation.

A 950mm; B 100mm; C 1200mm; D 2000mm; E 850mm; F 800mm; G 800mm;

Standard accessories

A — Remote hydroelectric station ; B — Remote control panel ; C — Lenticular corrugated coating ; D — Limit switches for limiting the lifting height and shutting ; E — Reinforced lifting platform ; F — Protection against tilting of the scissor lift ; G — Press – oilers (greases) for service maintenance of all mobile units of the lifting mechanism ; H — Chokes for adjusting the lifting and lowering speed of the lifting table ; I — Safety valves (preventing the table from falling in case of pressure loss in the hydraulic system) ; J — Overload protection ;

Delivery conditions

  • Package: wooden box;
  • Warranty: 12 months;
  • Delivery conditions: EWX Peschiera Borromeo – (MI), Italia
  • Manufacturer: IDRODINAMICA GIDROLAST SRL, ITALY.

Why choose our company?

Branded hydraulic Gidrolast, Italy
Material critical structures from 13Mn6, SB49, А-516
Operating temperature from -30°С...to +80°С
Average service life - up to 5 years
Products are certified according to requirements EAC and EC
Use of standard components and parts
More than 50 repair center in Europe
Warranty 30 000 cycles

Reviews

There are no reviews yet.

Be the first to review “Low profile lifting table Gidrolast LX11”

Your email address will not be published. Required fields are marked *