4 post lift JA12000F-E

14 450 Excluding tax

Delivery time: 45-60 working days
Article: 700.018.001
Technical specifications:
Capacity, kg:


Platform lenght, mm:


Platform width, mm:


Lifting stroke up to, mm:


Minimum height, mm:


Technical specifications:
Capacity, kg


Platform lenght, mm


Platform width, mm


Lifting stroke up to, mm


Minimum height, mm



4 Post JA12000F-E is a heavy duty lift, which means the lift is for larger vehicles and light trucks. 4 Post JA12000F-E is the choice for the quality confident consumer, all the newest technologies has been used to provide a fast, strong and reliable 4 Post lift. Max. lifting height 1660 mm and a loading capacity of 12000kg. JA12000F-E are produced in Europe and CE approved.


JA12000F-E has 4 point safety locks which give the consumer a safe and reliable 4 post lift for everyday use.

Plain runways

JA12000F-E is produced with plain runways.

Functionality and capacity

JA12000F-E has a rise time of 45 sec. and lowering time of 35 sec. JA12000F-E is therefore particularly suitable for service for 4×4, Commercial, Heavy vehicles or Light trucks up to 12t

Access ramps

Because of the low profile access ramps, it is possible to work with all kinds of vehicles. When the lift is rising the ramps will tilt.

Technical specifications

Capacity, kg


Lifting stroke up to, mm


Minimum height, mm


Lifting time

45 seconds

Total weight

2500 kg

Drop time

35 seconds

Motor power

3 Kw

Noise level

65 db

Power supply



Jema Autolifte A/S, Denmark


Heavy duty, quality arm roller bearings. Crown head, yoke type, track roller bearings with a twin ball and cage, lithium greased and sealed for life. Chromed for heavy duty or stainless steel axle and cylinder pins as options.
Integral (within base frame) or remote power packs. IP54 as standard. 3 phase, single phase or low voltage DC and manual pumps available. Hold to run emergency lowering.


A 6300 mm; B 850 mm; C 3735 mm; D D: 710-E: Min. 780/Max. 1150; E D: 710-E: Min. 780/Max. 1150; F 300 mm; G 2155 mm; H 200 mm; I 2465 mm;

Standard accessories

The construction, hydraulic and electrical systems conform to the requirements of European standards. Typically these include safety gaps and clearances between fixed and moving parts, moving and moving parts, hose break rupture valves, mechanically actuated safety trip device, manually operated blocking devices, overload detection and protection. Most of Gidrolast scissor lift tables are supplied with an individual Load Test Certificate as well as the applicable Certificate of Conformity or Certificate of Incorporation.


A — Control box, remote control panel ; B — Lenticular corrugated coating ; C — 4 point safety locks (yes) ; D — Runways (yes) ; E — Access ramps (yes) ;

Delivery conditions

  • Package: standard for truck transport by land;
  • Warranty: 12 months;
  • Delivery conditions: EWX Peschiera Borromeo – (MI), Italia
  • Manufacturer: GIDROLAST, ITALY.

Why choose our company?

Branded hydraulic Gidrolast, Italy
Material critical structures from 13Mn6, SB49, А-516
Operating temperature from -30°С...to +80°С
Average service life - up to 5 years
Products are certified according to requirements EAC and EC
Use of standard components and parts
More than 50 repair center in Europe
Warranty 30 000 cycles


There are no reviews yet.

Be the first to review “4 post lift JA12000F-E”

Your email address will not be published. Required fields are marked *