Low profile scissor lift In-ground installation JA6001S

Name: Low profile scissor lift In-ground installation JA6001S
SKU: 700.019.001
Price: 2867 EUR
Availability: InStock

2 867€ Excluding tax

Delivery time: 45-60 working days

Available on demand

Article: 700.019.001

Technical specifications:

Capacity, kg:

3000

Platform lenght, mm:

1550-1950

Platform width, mm:

600

Lifting stroke up to, mm:

1800

Minimum height, mm:

110

Technical specifications:

Capacity, kg	3000
Platform lenght, mm	1550-1950
Platform width, mm	600
Lifting stroke up to, mm	1800
Minimum height, mm	110

Description

The JA6001S is a in-ground mounted and the minimum height is only 11 cm. JA6001S has ”Pull out” platforms to make sure it is workable for both small and long vehicles. It comes with rubber blocks which can be placed under the vehicle on the fix points. The lift reach quickly 1800 mm and has a loading capacity of 3000 kg. The Scissor lift uses only 220V and airconnection to release the fully automatic safety stop. JA6001S has TüV CE approval certificate!

For in-ground installation

JA6001S is for in-ground installations which allow the consumer to work on low profile cars.

Pull out platforms

JA6001S is produced with pull out platforms which makes it possible to work both on short and longer vehicles.

Platform protection

The low profile scissorlift is produced with platform protection and comes naturally rubber blocks that you can easily place under vehicle on the fix points.

Safety locks and power supply

Scissor lift JA6001S uses only 220V and airconnection to release the fully automatic safety stop. JA6001S has a digital information control box, which helps the user operate the lift safe and easy.

Technical specifications

Capacity, kg	3000
Lifting stroke up to, mm	1800
Minimum height, mm	110
Lifting time	50 seconds
Electrical requirement	220V power supply
Total weight	900 kg
Manufacturer	Jema Autolifte A/S, Denmark
Drop time	40 seconds
Motor power	2.2 Kw
Noise level	65 db

Dimensions

Heavy duty, quality arm roller bearings. Crown head, yoke type, track roller bearings with a twin ball and cage, lithium greased and sealed for life. Chromed for heavy duty or stainless steel axle and cylinder pins as options.
Integral (within base frame) or remote power packs. IP54 as standard. 3 phase, single phase or low voltage DC and manual pumps available. Hold to run emergency lowering.

A — 1550-1950 mm; B — 110-1850 mm; C — 1730 mm; D — 800 mm; E — 600 mm;

Standard accessories

The construction, hydraulic and electrical systems conform to the requirements of European standards. Typically these include safety gaps and clearances between fixed and moving parts, moving and moving parts, hose break rupture valves, mechanically actuated safety trip device, manually operated blocking devices, overload detection and protection. Most of Gidrolast scissor lift tables are supplied with an individual Load Test Certificate as well as the applicable Certificate of Conformity or Certificate of Incorporation.

A — Control box, Remote hydroelectric station ; B — Limit switches for limiting the lifting height and shutting ; C — Protection cover assembly (yes) ; D — Reinforced lifting platform (yes) ; E — Press – oilers (greases) for service maintenance of all mobile units of the lifting mechanism (yes) ; F — Chokes for adjusting the lifting and lowering speed of the lifting table (yes) ; G — Safety valves (preventing the table from falling in case of pressure loss in the hydraulic system) (yes) ; H — Overload protection (yes) ; ; ;